Powder Coating / Finishes

Wishbone Site Furnishings powder coating process results in a hard-wearing, extremely durable finish.

  • 9 standard colours
  • Super Durable TGIC powder
  • Meets AAMA 2604 specification
  • Meets AAMA 2605 specification (only available with Newlar Fluoropolymer Resin System)
  • Seal Coat dip E-CLPS non-phosphate coating provides excellent bonding properties and under-film protection

5 Stage Powder Coating Pre-Treatment System

Our Process Starts Where Others Finish

Stage One consists of a heated alkaline based degreaser / cleaner to remove mixed metals, oils and contaminates prior to powder coating.

Stage Two is an aerated cold water raise to remove the degreaser / cleaner solution.

Stage Three is an aerated acid based solution to etch and further clean the substrate of any contaminates and welding smoke.

Stage Four is an aerated fresh water rinse to remove the degreaser and cleaning solution.

Stage Five is a seal coat that has been added to our process, E-CLPS. E-CLPS is a chrome-free, non-phosphate liquid coating used to protect aluminum and zinc alloys with a clear, nearly colorless chemical Dried In Place (DIP) coating. When applied the coating has excellent paint bonding properties and affords under-film protection.

Super Durable TGIC Powders Meet or Exceed AAMA Specifications

Super Durable polyester powders have become the mainstay in the architectural / railing industry. Where standard polyester powders will provide only 2 years of gloss retention, Super Durable TGIC powder will retain greater than 50% of its original gloss for a minimum of 5 years in exposures comparable to South Florida. Our Super Durable Powders meet or exceed the 7.9 weathering parameters of the American Architectural Manufacturing Association (AAMA) 2604-2605 specifications, and Wishbone meets AAMA 2605 commercial specifications using Spraylat "Newlar"' powders.

Environmentally Friendly Powder Coating

Wishbone Site Furnishings supports earth-friendly "green" building practices. Our powder coating is environmentally friendly and contains no VOCs. Chemicals used in our processes can be neutralized and desposed of safely, and powder coating reduces the impact on human health compared to other coatings.

Wishbone Site Furnishings 2015 | #210-27090 Gloucester Way | Langley, BC CANADA V4W 3Y5
866 626 0476 sales@wishboneltd.com 

site by thejrp